How to pull a wheelbarrow behind a riding mower

How to pull a wheelbarrow behind a riding mower

How to pull a wheelbarrow behind a riding mower. Riding mowers are perfect for large lawns and commercial uses because they cover greater ground than walk behind mowers in a shorter period of time.

For some, investing in a riding mower is a no brainer as they can be useful for many other purposes with a little bit of ingenuity.

One of the little known applications of these mowers is using it as a cheap dumping lawn cart, by way of pulling a wheelbarrow behind it.

With this setup, you can dump loads of grass clippings and other trash quickly, effectively taking the hard work out of yard clean-up tasks.

Now, if you’re enthusiastic about turning a wheelbarrow into a handy trailer, here is how to pull a wheelbarrow behind a riding mower and haul a lot of trash with it.

How to pull a wheelbarrow behind a riding mower

If you own a large yard, a tow-behind cart for your ride-on mower is virtually a necessity.

Employ these tricks to turn your wheelbarrow into a trailer that you pull behind your lawnmower.

Option 1: Use a Wheelbarrow towing hitch to convert wheelbarrow to cart

With a hitch, you can attach your wheelbarrow to countless towing vehicles including riding mowers, garden tractors, ATVs/UTVs, and more.

In essence, the main issue it overcomes is the need for your riding mower to give lateral or horizontal stability to the wheelbarrow.

The hitch achieves this through the design…

To begin with, the gadget comprises a disc that is mounted horizontally to the rear of the mower, with a diameter to match the distance between the 2 handles of your wheelbarrow.

The disc is usually designed to rotate freely about its own axis – typically in a horizontal plane.

At the same time, you fasten the handles of your wheelbarrow to its perimeter using universal couplings.

The wheelbarrow can, as a result, swing both horizontally and vertically in line with the mower, in almost the same way a two-wheel trailer moves in relation to the towing car.

You can choose to make a DIY wheelbarrow towing hitch compatible with your rideon mower unit or shop for an aftermarket model.

Overall, using a towing hitch that is strong is perhaps the easiest method to hook up a wheelbarrow to your riding lawnmower when you want to use it to clean out debris.

NOTE: Check if this video can be used to demonstrate. Here is another one.

Option 2: Use a Tow-bar for wheelbarrows

A tow bar is probably the greatest alternative to the towing hitch and works superbly too.

For the most part, a tow bar assembly to transform a standard two-wheeled wheelbarrow into a versatile lawn care trailer consists of a bar of heavy-duty metal box tubing, that has horizontal holes (at the wheelbarrow’s end) and vertical holes (at the mower end).

The wheelbarrow end slides onto the axle-of your wheelbarrow-in such a way that the bar is kept between the toe plate and the tub of your wheelbarrow.

Grommets are placed on the axle (on each side of the tow bar) to center the entire bar assembly properly on the axle.

How to tow Garbage bins

A threaded post, inserted into the previously-made holes (in the mower end of the tow bar) and locked securely into place with nuts make up the final part of the setup.

Turning to its usage, both handles of your wheelbarrow are raised before the post is inserted right into the aperture- of your mower’s draw bar- from the bottom of the aperture.

The wheelbarrow cannot detach during transport as the weight is cantilevered to prevent it from disengaging from the mower.

The other notable thing is that the legs of your wheelbarrow will be raised off the ground with this invention.

If needed, you can modify this design if you intend to haul heavy loads- simply attach a piece of iron (should be flat) to the upper side of the wheelbarrow rails close to the dumping end.

How to use a pull behind dethatcher

With that, the tow bar rests on the newly-added flat iron rather than your wheelbarrow’s toe bracket, giving your ‘barrow-cart’ more strength.

Since there are no vendors selling readymade wheel tow bars for riding mowers – at least at the time of writing this- your best bet is adapting the plan we have explained above to build yours.

You will be surprised how simple this concept can be to implement, even if you’re not mechanically inclined.

Can you jack up a riding lawn mower?

Provide a dolly (or a similar set of wheels)

Another method of making your wheelbarrow serve as a pull-behind trailer to be towed by a riding lawn mower is to come up with a dolly or other small pair of wheels on which your wheelbarrow rides, once you connect the dolly to the riding lawnmower.

However, this technique has a couple of drawbacks.

For example, a number of distinct parts and a complex interchange of the device’s supporting arms is needed to successfully make a garden trailer out of your wheelbarrow.

Besides, wheelbarrow restraining safety chains and wheel straps are a must-have for you to secure the towed wheelbarrow to the riding mower.

wheelbarrows

You may contact your nearest webbing or rigging vendors and arrange with them to make customized wheel straps and safety chains to suit.

In short, it takes quite a bit of detailed engineering to put together a safe and strong enough dolly for the purpose.

Look for inspiration from YouTube if you want to take this path.

In summary, here is how to pull a wheelbarrow behind a riding mower: Add a tow bar assembly to the wheelbarrow and connect it to the mower or simply use a sturdy wheelbarrow towing hitch.

You can as well go the more difficult way and fabricate a dolly for the wheelbarrow to ride or a set of wheels that can function in the same way.

Of course, regardless of the method you have used, you can easily unhook the wheelbarrow from the mower and use it the normal way when needed.

How to tow garbage bins to the road

  • Leave a Comment